STEP 1 - Start by popping out the main die-cut card shape from its sheet and, using the precut line as a guide, fold in half. Run the hard edge of a ruler or scoring tool along your folded edge, we want the fold to be as flat as possible.

STEP 2 - Next, add dimension to your Wellington Boots by adding on the second die cut layer. Pop your shape from the sheet and, placing foam pads between the layers, add to your folded card - this will help your boots stand out from the background design.

STEP 3 - To make your floral arrangement, start by popping out the insert piece from your sheet. Select your flowers and stick your large floral base layer to the insert using adhesive or foam pads. For a more full-looking arrangement, separate the two largest decoupage pieces and stick to your insert - you can now take your remaining layers and build up your design. Tip: Keep checking your arrangement against the envelope to make sure your finished card will still fit. Once you’ve built your flowers, add double sided tape to the bottom section of your insert.

STEP 4 - Place your insert piece into the slot at the top of your Wellington Boots card - once you're happy with your positioning, lift up your boots and peel back your double sided tape before sticking into place. You can now unfold your card and add your message to the inside - we’ve included handy sentiments on your die cut decoupage sheet!

STEP 1 - Start by popping out the main die-cut card shape out from your sheet, then flip over so the blank side is facing up - you should now see three pre scored lines at the bottom of your card (highlighted red). Starting from the top score line, fold up and away from you. For the second score line, fold down towards you. Finally, fold the third score line up and away from you to create your glue tab.

STEP 2 - Once you have your accordion fold created, apply a thin strip of adhesive to the tab. Next, fold and bring the top half of your card down towards the base and stick to the glue tab. Your card should now be able to stand up in place.

STEP 3 - The next step is to add the floral arrangement to your card. To start, pick your flowers from the decoupage sheet and build your arrangement layer by layer, using foam pads for a 3D effect. Once finished, attach to the insert piece included in the die-cut watering can card sheet and slot into the opening at the top of your card. Once you’re happy with the positioning, stick in place to the back of the card front.

STEP 4 - Finally, it’s time to add the finishing touches! Choose from a straight or scalloped trim style and glue to the rim and base of your watering can card. Then pop out the matching sentiment from your sheet and add to your card. When it’s time to give to your loved one, add your message in the space provided on the reverse of your card!

STEP 1 - Start by popping out the main die-cut card shape out from your sheet, then flip over so the blank side is facing up - the picket fence should be on the left hand side. Fold over the picket fence side to the right using the pre-scored line.

STEP 2 - Next, pop out the remaining two plank pieces from your sheet. Using foam pads or adhesive, attach horizontally to complete your basic card shape. Trim the horizontal planks down to suit for a better fit in your envelope.

STEP 3 - Next, choose of the four printed scenes included in this pack and glue to the inside of your card. Optional: Mat and layer your background scene with any 5x7” cardstock you’d like for an elevated look.

STEP 4 - Now you can move onto decorating your picket fence with its flowers. Pick your bouquet of choice and attach to the lower wood panel using foam pads or adhesive. We recommend using the two largest die-cut pieces and separating them out so they cover the length of the fence. Once you’re happy with position, pop out all the remaining die cut pieces and layer with foam pads until you complete your 3D bouquet.

STEP 5 - Finally, pop out the die cut bird and sentiment plaque of your choosing and, using foam pads or adhesive, attach to your Picket Fence card. You can add a message (or Peelable) to the inside of your card in the space provided at the bottom.

STEP 1 - Before starting the assembly of your Flower Patch Card, you need to choose your desired look. There are two pot styles to choose from - a white rim with the design on the main body, or a white body with the design on the rim. We’ve put together a little illustration above to demonstrate.

STEP 2 - Once you have the desired look in mind, pop the main die-cut card shape out from your sheet and fold along both pre-scored crease lines in an accordion pattern.

STEP 3 - Next, stick your card together in place by applying two small strips of adhesive (we recommend double-sided tape) to the top half of both left and right sides of your flower pot - don’t apply adhesive all the way down as you will need enough space for your rectangular ‘insert’ to slide all the way in at the end (see steps 5 & 6).

STEP 4 - Next, secure your pot lid by adding two large foam pads and folding back down, sticking securely into place. Note: if you don’t want a ‘raised’ effect to your lid, you can use any type of adhesive instead.

STEP 5 - Finish assembling the pot card shape by adding the easel stand to the back. Pop out the die-cut shape from the sheet and fold along the pre-scored crease line, this creates the glue tab needed to attach. Apply your chosen adhesive to the tab and stick into place, making sure your stand piece lines up flush to the bottom of your card. Note: If you’ve chosen to have the design on the main body of your pot, place the adhesive on the white side of the tab to create a seamless look when stuck down.

STEP 6 - The next step is to add the floral arrangement to your card. To start, pick your flowers from the decoupage sheet and build your arrangement layer-by-layer, using foam pads for a 3D effect. Once finished, attach to the insert piece included in the die-cut Flower Patch Pots card sheet, leaving room at the bottom to write a message. Slot the insert into the opening at the top of your card, and position into place.

STEP 7 - Finally, decorate your finished pot with the included ribbon embellishment and add a sweet sentiment using the included Pastel Birthday Banners.